How to change boot splash in to text mode
ana07
tháng 12 27, 2012
You can change Ubuntu traditional graphical boot splash into text mode. See the following commands, gedit /etc/default/grub Find the followi...
Thứ Năm, 27 tháng 12, 2012
Thứ Ba, 18 tháng 12, 2012
How to solve message Waiting for tray 0 to lift with HP Laserjet printers
ana07
tháng 12 18, 2012
The message error Waiting for tray 0 to lift appears on these printers: HP CM6030, CP3525, CP4005, Laserjet 4000, 4200, 4250, 4350, 4700, 5...
Thứ Sáu, 14 tháng 12, 2012
Error 13.09.00 on HP Color LaserJet 4600
ana07
tháng 12 14, 2012
Error 13.09.00 indicates a paper delay jam has occurred. Remove any stuck media from the fuser access area, the duplexer area (if equiped)...
Error 60.02 on HP Laserjet 4250 series
ana07
tháng 12 14, 2012
It appears that the spring which holds the lifter motor upright was designed without enough tension on it. If the spring is removed and the ...
HP Laserjet 49 errors
ana07
tháng 12 14, 2012
HP laserjet 49 errors are a firmware error, it might be caused by the firmware itself, or by the failure of a printer module. How to isolat...
Samsung CLP-510 service manual
ana07
tháng 12 14, 2012
The Xerox 6100 is equivalent to the Samsung CLP-510 service manual : https://www.office.xerox.com/partners/products/Phaser6100/Phaser6100Se ...
Reset purge counter for Brother MFC-J265W
ana07
tháng 12 14, 2012
To reset the purge counter of Brother MFC-J265W: Unplug the power cable. Hold down the " Start " button. Without release the ...
Thứ Ba, 11 tháng 12, 2012
Error 3501 on Kodak Easyshare 5100 and 5300
ana07
tháng 12 11, 2012
Error 3501 is a problem of calibration. Solution 1: Place the calibration sheet on the scanner. Then press the "Start" button. S...
